Florida Product Approvals and Miami-Dade NOAs
A plans examiner is not only checking whether a window, door, roof covering, or shutter “looks like a good product.” The examiner is checking whether the exact approved system is rated for the site, the code edition, and the way it will be installed. Incomplete or mismatched approvals are one of the fastest ways to stall a Florida permit.
Two approval systems you will see on Florida jobs
Florida uses a statewide product-approval program administered through the Florida Building Commission, and Miami-Dade County issues its own Notices of Acceptance (NOAs) through its Product Control program. They are related, but they are not the same document, and they are not interchangeable just because a product is “approved somewhere in Florida.”
| Florida Product Approval (FL number) | Miami-Dade Notice of Acceptance (NOA) | |
|---|---|---|
| Who issues it | Florida Building Commission product-approval program | Miami-Dade County Product Control |
| Identifier | An FL number, including the suffix after the decimal (for example, the full number, not only the digits before the decimal) | An NOA number for a specific product or system |
| Official search | floridabuilding.org product approval search | Miami-Dade Product Control Search |
| Typical products | Building components in the statewide categories (commonly including exterior doors, windows, roofing, shutters, skylights, panel walls, and structural components — confirm the category in the database) | Products and systems accepted by Miami-Dade, often used for work in Miami-Dade and, where accepted, in other High Velocity Hurricane Zone applications |
A product approval or NOA is a compliance document. It tells the building official and the inspector how the product was evaluated and, just as important, how it must be installed for that approval to be valid. Installing “a similar unit” or substituting anchors, substrates, or glazing from a different approval can void the approval and fail the inspection.
How to look up an FL number or an NOA
For a statewide Florida Product Approval, use the official search at https://www.floridabuilding.org/pr/pr_app_srch.aspx. Search by the full FL number, or by manufacturer and category if you do not have the number yet. Select the code version that applies to the permit. As of this writing the Florida Building Code, 8th Edition (2023), is in effect; the 9th Edition (2026) is scheduled to take effect December 31, 2026. An approval issued or evaluated under the wrong edition may not support the application.
For a Miami-Dade NOA, use https://productcontrol.miamidade.gov/. Miami-Dade also maintains a Product Approval overview page at miamidade.gov. Download or print the current NOA, not a contractor’s cropped photo of an old first page.
When a jurisdiction asks for the Product Approval number, give the complete number, including the suffix after the decimal. Charlotte County’s published guidance, for example, tells applicants to provide the specific number including the digits after the decimal, because those suffixes distinguish related approvals.
What a plans examiner actually checks
A complete submittal usually has to show all of the following. If any item is missing, expect a comment letter, not a stamp.
- The right document. The FL number or NOA on the plans matches the PDF in the package, is current (not expired or withdrawn), and is for the product actually being purchased — same series, opening size limits, and configuration (for example, a mullion, a transom, or a glazed-door assembly is not automatically covered by a similar fixed-window approval).
- The right code edition and use. The approval applies to the Florida Building Code edition in force for that application, and to the intended use (residential or commercial, interior or exterior, HVHZ or non-HVHZ, impact or non-impact, as the approval states).
- Site conditions. Design wind pressures, exposure category, building height, roof zone or wall zone, and flood or corrosion conditions are within the limits of the approval. Many jurisdictions require signed and sealed, site-specific wind-load calculations (positive and negative pressures at each opening) using the applicable ASCE 7 standard referenced by the code edition in force.
- Installation instructions. The approval’s installation details — anchors, edge distances, substrate, buck or masonry opening, flashing, and any required stiffeners — are the details shown on the plans. Inspectors will check the job against those instructions, not against a generic manufacturer brochure.
- No substitution without a new approval or site-specific engineering. If the product does not have an approval for the location or the intended installation, the usual path is site-specific engineering, signed and sealed by a Florida-licensed design professional. If that engineer is not the engineer of record for the structure, jurisdictions often also want the engineer of record’s acceptance of the site-specific design.
Product Control staff at Miami-Dade describe the NOA as the document that links manufacturing and construction and that provides the information needed to establish code compliance for permitting, installation, and inspection. That is a useful way to think about statewide FL approvals as well: if the inspector cannot verify the installation from the approval in the job file, the inspection is not ready to be called.
High-velocity hurricane zone and site conditions
Miami-Dade County and Broward County are treated as the High Velocity Hurricane Zone (HVHZ) under the Florida Building Code. Work in the HVHZ often has stricter envelope and impact requirements, and many product approvals are issued in both HVHZ and non-HVHZ versions. Do not submit a non-HVHZ approval for an HVHZ address, and do not assume a Miami-Dade NOA is automatically accepted in a non-HVHZ county, or the reverse, without checking the approval language and the local department.
Outside the HVHZ, Florida still has wind-borne debris regions and design wind speeds that vary by location and risk category. Those values belong in the calculations and must line up with the limits printed on the approval. This guide does not quote wind-speed maps, because the applicable value is site-specific and is tied to the code edition in force.
What to put in the permit package
- A list of every exterior envelope product that needs an approval (windows, doors, roof covering, skylights, shutters, panel walls, and other structural components, as applicable), with the full FL or NOA number next to each mark on the plans.
- The current approval document and its installation instructions, not a cover page alone.
- Site-specific wind-load calculations, signed and sealed when the jurisdiction or the design requires them.
- A note on the plans that the product will be installed per the cited approval. If a detail on the plans conflicts with the approval, fix the plans before you file.
- A job-site set, because the inspector will compare anchors and openings to the approval, not to memory.
Code-edition warning: The Florida Building Code, 9th Edition (2026), is scheduled to take effect December 31, 2026. Approvals, calculations, and energy forms should match the edition that will govern the application on the day it is filed. If your project will be submitted near that date, confirm the cutoff with the building department before you freeze the product list.
Next Step Building Solutions uses plan-review checklists that include product-approval and NOA verification as a standard step, because a missing suffix or an expired document is expensive only after it sits in a comment cycle.
Want a submittal checked before you file?
Statewide Florida permit-prep help and private provider plan review, including product-approval review against the documents in your package.
- Email: [email protected]
- Phone: Office: (352) 554-7691 · Cell: (727) 255-1904
Official and primary sources
- Florida Building Commission, Product Approval search
- floridabuilding.org and the DBPR Product Approval program page
- Miami-Dade County Product Control Search
- Miami-Dade Product Approval overview
- Florida Building Commission, 8th Edition (2023) effective date
- Miami-Dade County, 9th Edition (2026) effective-date notice
Local submittal checklists vary. Always follow the building department that will issue the permit. See the disclaimer.