Services & Pricing

2026 fee schedule for Next Step Building Solutions LLC private provider plan review and inspections, statewide in Florida. Fees are based on square footage or a flat fee for the permit type.

Last reviewed November 18, 2026 (America/New_York)

Free resources. Guides, a contractor kit, and a short course are on the Free & Paid Resources page. Those materials are informational and are separate from the private-provider fees on this page.

These are 2026 rates from the firm’s Exhibit A fee schedule. Fees are based on square footage or a flat fee for the permit type, never on construction cost or valuation. Every project shows a $200 administration fee as its own line, included in the total. Rates are subject to a written agreement, and Exhibit A controls over any proposal if the numbers differ. Quoted prices are good for 60 days. Local building-department fees are not included. A change in square footage, scope, or insurance limits requires a change order.

How fees are set

Unit rates are $300 per inspection and $250 per plan review (per discipline), plus a $200 administration fee on every project. Larger projects are priced by square footage, with minimums equal to the unit-rate build-up for a typical scope. Smaller permits are a flat fee. Construction cost is asked for only to confirm the professional-liability insurance tier that F.S. 553.791 requires.

Residential projects, by square footage

For 1- and 2-family homes and townhouses. New homes, additions, detached garages, and site-built accessory structures are measured by gross square feet under roof, including garage and covered porches. Remodels are measured by the altered floor area. Above 5,000 sq ft, plan review is $0.15/sq ft and inspections are $0.40/sq ft for the extra area.

Project typePlan reviewInspectionsAdminMinimum total
New home
gross sq ft under roof
$0.30/sq ft
min $1,000
$0.75/sq ft
min $1,500
$200$2,700
Addition / detached garage / site-built accessory
gross sq ft under roof
$0.30/sq ft
min $750
$0.75/sq ft
min $1,200
$200$2,150
Interior remodel / alteration
altered floor area
$0.25/sq ft
min $500
$0.60/sq ft
min $900
$200$1,600

Example: a 3,000 sq ft new home is $900 plan review → $1,000 minimum, + $2,250 inspections + $200 admin = $3,450. Plan review only = plan review line + $200 admin; inspections only = inspection line + $200 admin.

Commercial and multifamily, by square footage

For commercial buildings and multifamily buildings with three or more units. Above 10,000 sq ft, the lower rate applies to the extra area (new buildings $0.15 plan review and $0.35 inspections; alterations $0.12 and $0.30). Projects over 50,000 sq ft are quoted in writing.

Project typePlan reviewInspectionsAdminMinimum total
New building / addition
gross sq ft
$0.25/sq ft
min $2,000
$0.60/sq ft
min $3,600
$200$5,800
Alteration / tenant buildout
altered floor area
$0.20/sq ft
min $1,000
$0.45/sq ft
min $3,000
$200$4,200

Flat fees by permit type

Flat fee = inspections × $300 + plan reviews × $250 + $200 admin. Solar, generator, and pool packages are capped at $1,450. Any single-trade permit not listed is $200 admin + $250 per plan review + $300 per inspection.

Permit typeInspectionsPlan reviewsAdmin (included)Flat fee
Re-roof (residential)21$200$1,050
Window / door replacement21$200$1,050
HVAC changeout21$200$1,050
Prefabricated shed / accessory structure21$200$1,050
Residential solar PV32$200$1,450
Generator53$200$1,450
Pool / spa83$200$1,450
Water heater replacement11$200$750
Electrical service change / panel11$200$750
Plumbing re-pipe21$200$1,050
Gas piping / LP tank21$200$1,050
Fence (wood, vinyl, chain link, aluminum)11$200$750
Masonry fence / wall21$200$1,050
Screen / pool enclosure21$200$1,050
Hurricane shutters / impact panels11$200$750
Demolition11$200$750
Manufactured / mobile home set-up and tie-down31$200$1,350
Commercial re-roof (up to 10,000 sq ft; +$300 per added 10,000 sq ft)31$200$1,350

Add-on fees

Item Fee
Re-inspection or not-ready $175–$275
Late cancellation $150–$250
After-hours $350–$450
Virtual inspection extra $125–$175
Standalone Certificate of Compliance $350
Travel after 40 miles one-way $1.50–$2.00 per mile, round trip
Rush plan review +30%–50% of the plan review fee
Expedited inspection +$75–$150
Inspections beyond the code-required count for the scope$300 each

Preferred-builder rider

An optional preferred-builder rider can apply a written discount off Exhibit A plan review and inspection fees (not the $200 admin fee). The rider typically sets a minimum of 5 projects, or another number the parties agree to. It does not apply to rush, after-hours, or not-ready fees unless the rider says so. Each project still needs its own agreement, Notice to Building Official, and insurance-tier check. The rider may be revoked for nonpayment or repeated not-ready sites.

Residential builder subscription

The standard value is $8,400 per house, based on 24 inspections at $300, 4 trade reviews at $250, and $200 administration. Tiers are by houses per year. Commercial subscriptions are quoted separately. Subscription terms are set in a separate written subscription agreement.

Houses per year Discount Price per house
1–2 0% off $8,400
3–5 10% off $7,560
6–9 12.5% off $7,350
10–19 15% off $7,140
20+ 20% off $6,720

Subscription terms

  • $35 late fee after 5 days
  • Service may be suspended after 10 days overdue
  • 30 days’ notice to cancel
  • $150 early-cancellation fee

Payment and cancellation terms

Project packages

These packages follow the Exhibit A schedule above. New homes, additions, remodels, detached garages, and the small commercial buildout are priced by square footage; the single-trade packages are flat fees. No package is priced by construction cost or valuation. The $200 administration fee is its own line and is included in each total, not added on top.

The $8,400 new-home subscription value (24 inspections × $300 + 4 trade reviews × $250 + $200 admin) covers a different scope — a residential builder subscription with volume discounts — and is not the per-project package price. Re-inspection and not-ready fees of $175–$275 still apply on top, per Exhibit A.

Counts are typical, not a guarantee that every project needs every visit. The local building official sets inspection timing and sequencing.

Project type Inspections Trade reviews Admin Package fee Example
New single-family home 24 4 $200 $1.05/sq ft
$0.30 plan review + $0.75 inspections + $200 admin; minimum $2,700
2,500 sq ft: $3,075
Addition 16 4 $200 $1.05/sq ft
$0.30 plan review + $0.75 inspections + $200 admin; minimum $2,150
600 sq ft: $2,150
Interior remodel / alteration 9 4 $200 $0.85/sq ft
$0.25 plan review + $0.60 inspections + $200 admin; minimum $1,600
800 sq ft: $1,600
Re-roof 2 1 $200 $1,050 Flat: 2 × $300 + 1 × $250 + $200
HVAC changeout 2 1 $200 $1,050 Flat: 2 × $300 + 1 × $250 + $200
Residential solar PV 3 2 $200 $1,450 Flat (approved cap)
Generator 5 3 $200 $1,450 Flat (approved cap)
Pool / spa 8 3 $200 $1,450 Flat (approved cap)
Window / door replacement 2 1 $200 $1,050 Flat: 2 × $300 + 1 × $250 + $200
Accessory structure / prefabricated shed 2 1 $200 $1,050 Flat: 2 × $300 + 1 × $250 + $200
Detached garage (site-built, electrical only) 10 2 $200 $1.05/sq ft
$0.30 plan review + $0.75 inspections + $200 admin; minimum $2,150
600 sq ft: $2,150
Small commercial tenant buildout 10 4 $200 $0.65/sq ft
$0.20 plan review + $0.45 inspections + $200 admin; minimum $4,200
3,000 sq ft: $4,200

New single-family home

Typical required inspections (24):

  • Foundation / footers (NSBS Foundation; FBC 110.3 Building 1)
  • Stem wall or fill cells, when used (FBC 110.3 Building 1 components; often a separate visit)
  • Slab (NSBS Slab; FBC 110.3 Building 1)
  • Plumbing underground (FBC 110.3 Plumbing 1)
  • Electrical underground (FBC 110.3 Electrical 1)
  • Temporary power / T-pole (typical Florida practice; not a numbered 110.3 item)
  • Sheathing (NSBS Sheathing; FBC 110.3 Building 3)
  • Framing (NSBS Framing; FBC 110.3 Building 2)
  • Openings / windows and doors (NSBS Openings)
  • Roof dry-in (NSBS Roof; FBC 110.3 Building 5; typically a separate visit)
  • Roof final (NSBS Roof; FBC 110.3 Building 5)
  • Exterior wall coverings / soffit (FBC 110.3 Building 4)
  • Insulation / energy (NSBS Insulation; FBC 110.3.8)
  • Rough electrical (NSBS Rough E; FBC 110.3 Electrical 2)
  • Rough plumbing (NSBS Rough P; FBC 110.3 Plumbing 2)
  • Rough mechanical (NSBS Rough M; FBC 110.3 Mechanical 2)
  • Rough gas, when gas is installed (FBC 110.3 Gas 1)
  • Lintel / tie-beam, when used (often a separate visit on masonry homes)
  • Mechanical underground, when underground ducts or fuel piping are installed (FBC 110.3 Mechanical 1)
  • Final building (NSBS Final B; FBC 110.3 Building 6)
  • Final electrical (NSBS Final E; FBC 110.3 Electrical 3)
  • Final plumbing (NSBS Final P; FBC 110.3 Plumbing 3)
  • Final mechanical (NSBS Final M; FBC 110.3 Mechanical 3)
  • Final gas when gas is installed, or gypsum/lath when required (FBC 110.3 Gas 2 or 110.3.5)

Math: Plan review $0.30/sq ft (minimum $1,000) + inspections $0.75/sq ft (minimum $1,500) + $200 admin, measured by gross sq ft under roof. The minimums equal 4 plan reviews × $250 and 5 inspections × $300, so the smallest job of this type is $2,700. The $200 admin fee is its own line and is included in the total.

Size (gross sq ft under roof)Plan reviewInspectionsAdminTotal
1,500 sq ft$1,000$1,500$200$2,700
2,500 sq ft$1,000$1,875$200$3,075
3,500 sq ft$1,050$2,625$200$3,875
5,000 sq ft$1,500$3,750$200$5,450

The 24-inspection count matches the published residential builder subscription. A typical four-trade new home often needs about 18–24 separately scheduled visits, depending on foundation type, whether gas is installed, and how the building official splits 110.3 components. The package uses the 24-inspection standard value.

Exhibit A: Priced by square footage under the Exhibit A residential schedule (new home), not by construction cost or valuation. The $8,400 subscription value covers a different scope — a residential builder subscription priced from unit rates with volume discounts — and is not this per-project package.

Addition

Typical required inspections (16):

  • Foundation (NSBS Foundation; FBC 110.3 Building 1)
  • Slab (NSBS Slab)
  • Plumbing underground, if new under-slab piping (FBC 110.3 Plumbing 1)
  • Sheathing (NSBS Sheathing; FBC 110.3 Building 3)
  • Framing (NSBS Framing; FBC 110.3 Building 2)
  • Openings (NSBS Openings)
  • Roof dry-in (NSBS Roof; FBC 110.3 Building 5)
  • Roof final (NSBS Roof)
  • Insulation / energy (NSBS Insulation; FBC 110.3.8)
  • Rough electrical (NSBS Rough E)
  • Rough plumbing (NSBS Rough P)
  • Rough mechanical (NSBS Rough M)
  • Final building (NSBS Final B)
  • Final electrical (NSBS Final E)
  • Final plumbing (NSBS Final P)
  • Final mechanical (NSBS Final M)

Math: Plan review $0.30/sq ft (minimum $750) + inspections $0.75/sq ft (minimum $1,200) + $200 admin, measured by gross sq ft under roof. The minimums equal 3 plan reviews × $250 and 4 inspections × $300, so the smallest job of this type is $2,150. The $200 admin fee is its own line and is included in the total.

Size (gross sq ft under roof)Plan reviewInspectionsAdminTotal
400 sq ft$750$1,200$200$2,150
800 sq ft$750$1,200$200$2,150
1,500 sq ft$750$1,200$200$2,150

Typical heated and cooled room addition involving all four trades. Electrical underground is omitted unless a new underground feeder is installed.

Exhibit A: Priced by square footage under the Exhibit A residential schedule (addition / detached garage / site-built accessory), not by construction cost or valuation.

Interior remodel / alteration

Typical required inspections (9):

  • Framing, if walls or layout change (NSBS Framing; typical remodel framing inspection)
  • Insulation, if walls or ceilings are opened (NSBS Insulation; FBC 110.3.8)
  • Rough electrical (NSBS Rough E; FBC 110.3 Electrical 2)
  • Rough plumbing (NSBS Rough P; FBC 110.3 Plumbing 2)
  • Rough mechanical (NSBS Rough M; FBC 110.3 Mechanical 2)
  • Final building (NSBS Final B)
  • Final electrical (NSBS Final E)
  • Final plumbing (NSBS Final P)
  • Final mechanical (NSBS Final M)

Math: Plan review $0.25/sq ft (minimum $500) + inspections $0.60/sq ft (minimum $900) + $200 admin, measured by altered floor area. The minimums equal 2 plan reviews × $250 and 3 inspections × $300, so the smallest job of this type is $1,600. The $200 admin fee is its own line and is included in the total.

Size (altered floor area)Plan reviewInspectionsAdminTotal
500 sq ft$500$900$200$1,600
1,000 sq ft$500$900$200$1,600
2,000 sq ft$500$1,200$200$1,900

Typical interior remodel in which walls are opened and all four trades are affected. No new foundation or roof. Drop unused trades if the scope is narrower.

Exhibit A: Priced by square footage under the Exhibit A residential schedule (interior remodel / alteration), not by construction cost or valuation.

Re-roof

Typical required inspections (2):

  • Roof dry-in / flashing in progress (NSBS Roof; FBC 110.3 Building 5; typical AHJ split)
  • Roof final (NSBS Roof; FBC 110.3 Building 5)

Math: Package fee $1,050. Admin $200 is included in that fee, not added on top. Residual $850 covers the 2 inspections and 1 trade review (Building (product approval / NOA review; FBC 107.3.5 may exempt reroof plan review — confirm local policy)), which is an effective $425 per inspection.

If roof decking is replaced, a sheathing inspection is typically added. Any extra visit is confirmed at quote and billed at $300 per added inspection under Exhibit A. FBC 107.3.5 Exemption 2 can waive plans examination for reroofs; Florida product-approval or NOA review is still commonly required.

Exhibit A: Flat fee $1,050: 2 inspections × $300 + 1 plan review × $250 + $200 admin.

HVAC changeout

Typical required inspections (2):

  • Mechanical in-progress / rough (NSBS Rough M; typical AHJ HVAC change-out list)
  • Mechanical final (NSBS Final M; FBC 110.3 Mechanical 3)

Math: Package fee $1,050. Admin $200 is included in that fee, not added on top. Residual $850 covers the 2 inspections and 1 trade review (Mechanical), which is an effective $425 per inspection.

FBC 107.3.5 Exemption 1 may waive plans examination for replacement of existing equipment; confirm local policy. If a new circuit or disconnect requires an electrical inspection, that visit is confirmed at quote and billed at $300 per added inspection under Exhibit A.

Exhibit A: Flat fee $1,050: 2 inspections × $300 + 1 plan review × $250 + $200 admin.

Residential solar PV

Typical required inspections (3):

  • Array attachment / tie-down (NSBS Solar/Gen; building)
  • Electrical rough, if wiring will be concealed (NSBS Rough E; FBC 110.3 Electrical 2)
  • Electrical final (NSBS Final E; FBC 110.3 Electrical 3)

Math: Package fee $1,450. Admin $200 is included in that fee, not added on top. Residual $1,250 covers the 3 inspections and 2 trade reviews (Building and electrical), which is an effective $416.67 per inspection.

Some jurisdictions only require attachment and an electrical final (2 visits). This package keeps an electrical rough so concealed work is covered. A unit-rate build-up would have been $1,600, which is above the cap, so the package is priced at the approved $1,450 flat-fee cap.

Exhibit A: Flat fee $1,450, the approved cap for this permit type (unit build-up would be $1,600). Includes the $200 admin line.

Generator

Typical required inspections (5):

  • Pad / anchorage or slab (NSBS Slab or Foundation, as applicable)
  • Rough gas, for natural-gas or LP units (FBC 110.3 Gas 1)
  • Final gas (FBC 110.3 Gas 2–3)
  • Rough electrical / transfer switch (NSBS Rough E)
  • Final electrical (NSBS Final E; NSBS Solar/Gen)

Math: Package fee $1,450. Admin $200 is included in that fee, not added on top. Residual $1,250 covers the 5 inspections and 3 trade reviews (Building, electrical, and gas), which is an effective $250 per inspection.

Typical whole-house standby generator on a poured or prefabricated pad, with gas piping. An electric-only or prefabricated-pad hookup may drop the slab or gas visits. A unit-rate build-up would have been $2,450, which is above the cap, so the package is priced at the approved $1,450 flat-fee cap.

Exhibit A: Flat fee $1,450, the approved cap for this permit type (unit build-up would be $2,450). Includes the $200 admin line.

Pool / spa

Typical required inspections (8):

  • Steel / shell reinforcement and main drain, before concrete (NSBS Pool; FBC 110.3 Building 7 first inspection)
  • Equipotential bonding (electrical; often a separate visit)
  • Pool piping / pressure test (plumbing rough)
  • Deck (building)
  • Barrier / enclosure (required to pass FBC 110.3 Building 7 final and FBC 454.2.17 pool safety features)
  • Electrical final, including GFCI and equipment
  • Plumbing final, including equipment
  • Pool final (NSBS Pool; FBC 110.3 Building 7 final)

Math: Package fee $1,450. Admin $200 is included in that fee, not added on top. Residual $1,250 covers the 8 inspections and 3 trade reviews (Building, electrical, and plumbing), which is an effective $156.25 per inspection.

FBC 110.3 minimum for a pool is a first inspection (excavation, reinforcing steel, bonding, and main drain) and a final when the pool and enclosure are complete. Florida jurisdictions typically split bonding, piping, deck, electrical, and the barrier into additional visits. A gas pool heater would add gas inspections. A unit-rate build-up would have been $3,350, which is well above the cap, so the package is priced at the approved $1,450 flat-fee cap. The eight typical visits stay in the package; the implied per-inspection rate is lower because the cap is tight for this scope.

Exhibit A: Flat fee $1,450, the approved cap for this permit type (unit build-up would be $3,350). Includes the $200 admin line.

Window / door replacement

Typical required inspections (2):

  • Openings / framing in progress (NSBS Openings; typical window-and-door rough)
  • Building final (NSBS Final B; FBC 110.3.13 where impact-resistant coverings or systems are installed)

Math: Package fee $1,050. Admin $200 is included in that fee, not added on top. Residual $850 covers the 2 inspections and 1 trade review (Building (including product approval / NOA and impact-system review)), which is an effective $425 per inspection.

Product-approval or Miami-Dade NOA documentation is commonly reviewed even on a two-inspection job.

Exhibit A: Flat fee $1,050: 2 inspections × $300 + 1 plan review × $250 + $200 admin.

Accessory structure / prefabricated shed

Typical required inspections (2):

  • Slab or engineered anchorage (NSBS Slab)
  • Building final (NSBS Final B)

Math: Package fee $1,050. Admin $200 is included in that fee, not added on top. Residual $850 covers the 2 inspections and 1 trade review (Building), which is an effective $425 per inspection.

Unconditioned prefabricated shed with no electrical, plumbing, or mechanical work. If a circuit is installed, an electrical final is typically added and confirmed at quote and billed at $300 per added inspection under Exhibit A.

Exhibit A: Flat fee $1,050: 2 inspections × $300 + 1 plan review × $250 + $200 admin.

Detached garage (site-built, electrical only)

Typical required inspections (10):

  • Foundation (NSBS Foundation)
  • Slab (NSBS Slab)
  • Sheathing (NSBS Sheathing)
  • Framing (NSBS Framing)
  • Openings (NSBS Openings)
  • Roof dry-in (NSBS Roof)
  • Roof final (NSBS Roof)
  • Rough electrical (NSBS Rough E)
  • Final building (NSBS Final B)
  • Final electrical (NSBS Final E)

Math: Plan review $0.30/sq ft (minimum $750) + inspections $0.75/sq ft (minimum $1,200) + $200 admin, measured by gross sq ft under roof. The minimums equal 3 plan reviews × $250 and 4 inspections × $300, so the smallest job of this type is $2,150. The $200 admin fee is its own line and is included in the total.

Size (gross sq ft under roof)Plan reviewInspectionsAdminTotal
400 sq ft$750$1,200$200$2,150
600 sq ft$750$1,200$200$2,150
900 sq ft$750$1,200$200$2,150

Unconditioned site-built detached garage with electrical only. A conditioned garage with HVAC or plumbing is priced like an addition.

Exhibit A: Priced by square footage under the Exhibit A residential schedule (addition / detached garage / site-built accessory), not by construction cost or valuation.

Small commercial tenant buildout

Typical required inspections (10):

  • Framing, including tenant separation or rated-wall framing (NSBS Framing; FBC 110.3 Building 2)
  • Insulation (NSBS Insulation)
  • Rough electrical (NSBS Rough E)
  • Rough plumbing, if restrooms or a break room are in scope (NSBS Rough P)
  • Rough mechanical (NSBS Rough M)
  • Gypsum / firestopping for rated assemblies (FBC 110.3.5 and 110.3.7)
  • Final building (NSBS Final B)
  • Final electrical (NSBS Final E)
  • Final plumbing (NSBS Final P)
  • Final mechanical (NSBS Final M)

Math: Plan review $0.20/sq ft (minimum $1,000) + inspections $0.45/sq ft (minimum $3,000) + $200 admin, measured by altered floor area. The minimums equal 4 plan reviews × $250 and 10 inspections × $300, so the smallest job of this type is $4,200. The $200 admin fee is its own line and is included in the total.

Size (altered floor area)Plan reviewInspectionsAdminTotal
2,000 sq ft$1,000$3,000$200$4,200
5,000 sq ft$1,000$3,000$200$4,200
10,000 sq ft$2,000$4,500$200$6,700

Typical small office or retail interior buildout. Fire-suppression and fire-alarm inspections stay with the fire official and are not included. A space with no plumbing work would drop the two plumbing visits.

Exhibit A: Priced by square footage under the Exhibit A commercial / multifamily schedule (alteration / tenant buildout), not by construction cost or valuation.

Sources for these packages

  1. Next Step Building Solutions Field Operations Packet — inspection-request phases (Foundation, Slab, Framing, Sheathing, Rough E/P/M, Insulation, Roof, Openings, Pool, Solar/Gen, Final B/E/P/M).
  2. Next Step Building Solutions Plan Review Checklist (FBC 107.3.5) and Exhibit A fee schedule.
  3. Florida Building Code, Building, 8th Edition (2023), Section 110.3 and 110.3.5–110.3.13, as compiled by Bay County Building Safety; also quoted in Florida Building Commission education materials.
  4. Florida Building Code, Residential, 8th Edition (2023), Section R109 (inspections before work is concealed).
  5. Typical jurisdiction lists: Polk County inspections (re-roof, HVAC change-out, windows, prefabricated sheds); Town of Oakland private-provider inspection checklist; Miami-Dade County inspections (solar PV).

Request a quote

Use this form to reach Next Step Building Solutions at [email protected]. You can also call the office at (352) 554-7691 or cell at (727) 255-1904.

Services needed

Request a quote

Tell us the project type, square footage or scope, and jurisdiction, and we will confirm the applicable 2026 rate in a written agreement and Exhibit A.